Mar-Bel Associates
777 Walkerbilt Rd Unit #8
Naples, FL 34110
Phone: 727-251-4056 Fax: 239-236-4056 g.mouzakis@chicagobooth.edu www.marbel.com
PRICES AND SPECIFICATIONS SUBJECT
TO CHANGE WITHOUT NOTICE
MADE IN U.S.A.
INDUSTRIAL PRICING
MAR-BEL PINCH/NIP ROLLERS
ALL PINCH ROLLERS FEATURE A TOP ROLLFACE THAT IS 1.5” LONGER ON ONE END THAN THE BOTTOM ROLL FACE TO ACCOMODATE RAISED EDGES UP TO 2”. ALL STANDARD MOTORS ARE 1/4 HP, SPLIT PHASE, 110V, 60HZ TOTALLY ENCLOSED FAN COOLED GEARMOTORS. FRONT AND REAR SAFETY GATES AND MOTOR BRAKES ARE STANDARD EQUIPMENT. (SEE PINCH ROLL SPECIFICATION PAGE IN NAVIGATION BAR ABOVE FOR A DESCRIPTION OF SAFETY FEATURES, PRODUCT WARRANTY AND OPTIONS AVAILABLE)
OPEN END PRO7 MODELS
THE OPEN ENDED PRO7 HAS A “C” FRAME WHICH GIVES IT THE CAPACITY TO WORK WITH “L” SHAPED SUBSTRATE AS WELL AS OVERSIZE FLAT WIDTHS WHOSE UN-PRESSED AREA CAN ALSO BE RUN THROUGH THE MACHINE BY ROTATING IT 180 DEGREES IN THE HORIZONTAL PLANE AND RUNNING THROUGH THE UNIT AGAIN. THUS A 72” WIDE PANEL CAN BE PRESSED IN A 61.5” PRO7 BY MAKING TWO PASSES.
The Open-Ended PRO7 Model Series has a “C” Frame which gives it the capacity of working with “L” shapes and oversize flat widths whose un-pressed area can also be run through the machine by rotating it 180 degrees in the horizontal plane. Thus a 72” wide panel can be pressed in a 61-1/2” machine by making two passes.
* Machine’s actual weight is approximately 200 lbs less than the crated weight
** Due to sharp fluctuations in the steel and lumber markets, please confirm pricing and crating charge before quoting or ordering
IF YOU REQUIRE A FREIGHT QUOTE WE HIGHLY RECOMMEND MR. TIM MCMULLIN: merely supply him with the model number and destination zip code and he will respond by e mail or fax
Stronghold Solutions
Tim McMullin
Direct: 913.839.3546
Fax: 913-538-2225
tim.stronghold@gmail.com
